This is a direct bolt up with no modifications required and fits under the stock cage/body without trimming. The complete kit comes with everything needed to install and run. This engine is only available for the Losi 5ive-T 1.0 and Rovan/clone trucks. From our testing the added stroke helps with more torque and mid range power. This engine is now available with the option to add a +1mm stroke crankshaft to increase the displacement to 47cc. If you're unsure reach out to us first and send pictures.ĭOES NOT FIT: 5ive-T 2.0, 5ive-B, DBXL, MTXL, HPI, Redcat or MCD. Production Kit Steve Nancarrow's 57cc Methanol Twin Videoįits Losi 5ive-T 1.0 and Rovan/30D North trucks that are a clone of the 1.0. Hostile Racing Products Zero Growth Foams and Tires įirst prototype built for 2010 Dunetoberfest **Discount codes do not apply to this package** Layshafts are no longer included in the TR mounting kit and must be purchased separately. We solved the heating issue with the heat sink shown in the pictures, compression and custom modified pistons.ġx Fully Ported Inline Twin Engine with carbs and billet Heat Sink ġx Turtle Racing Mounting Kit: Pull start/coil plate, engine cradle mount (mounts engine to rear chassis plate, rear bulkhead, main chassis), tranny plate, one piece brake mount, 2x air boxs, billet clutch housing and chassis mount This engine is setup for 91 octane pump gas. This engine comes with two Wt-929 carbs, which can be upgraded to Wt-603's during checkout. We have installed two fully ported Zenoah G270RC 4 bolt 25.4cc top ends on this engine. This was our first choice due to the one piece crankshaft and the fact that this bottom end utilizes both needle and sealed crankcase bearings. The bottom end is a brand new RCMK V2 S-520. After watching the first run in the sand, we were hooked and have been working nonstop on this engine ever since. With only having about a week on the first build, we barely pulled it off in time to bring it out to Dunetoberfest. Joe, Dan and Sean dropped what they were doing and went to work on getting this engine into a baja. After seeing that the bolt pattern on the clutch side of the engine was the same on the water cooled twin, that got our wheels turning. At O'Neill Brothers Racing, our passion is building high performance engines and we are always thinking of new ideas and ways to get better. We had just recently received a shipment of water cooled twin engines. We would like to thank Dave from Turtle Racing, for the countless months, hours, and time that you spent helping us with the engine mounts.Ī week before 's 2010 Dunetoberfest, we came up with the idea to build the 50.8cc twin engine. Call or email for our current lead time.įirst, we want to thank all of our business partners and manufacturers for making this possible. Being that this is a larger displacement you can expect this twin to be the highest torque but not rev quite as high a 45 or 50.8cc. Same bottom end as a 45 or 50.8cc but with Zenoah 36mm top ends. The 57cc twin is brand new release and is currently the largest twin we offer. Contact us if your order is time sensitive as twins on average take 2-3 weeks to be built and shipped. Please note there is a lead time on this engine.
0 Comments
Leave a Reply. |